DIY-Calculator Hardware:Upload Utility Project

From DIY-Calculator_Hardware

Revision as of 15:08, 11 November 2006; view current revision
←Older revision | Newer revision→
Jump to: navigation, search

The user program upload process is handled by the ROM monitor on the DIY Calculator side. But there must be a means of sending a program to the DIY Calculator. While it is possible to send a file with the terminal emulation program a GUI program is preferable. Furthermore, by having a dedicated program for this task it is possible to generate a check sum or use a protocol of choice for ensuring correct transmission. The transmission status (success/failure) can be displayed. This program should be written in "C" using the GTK library of GUI widgets to be easily ported to different platforms.


Project status (11.Nov.2006):

We are proud to announce the 1.0 version of the DIY Calculator Loader application. See the main window of the application:
Loader application main screen
Enlarge
Loader application main screen
.


It enables you to do the following via graphical user interface:

  • load a user program to the DIY Calculator hardware
  • save the user program into onboard flash memory
  • run the user program
  • single step through the user program
  • display and update CPU registers during single step
  • view an arbitrary area of memory of the DIY Calculator
  • select a hexdump or a disassembler view
  • purge the DIY Calculator's memory
  • display the most important I/O ports
  • select the CPU speed. Caution: When setting the CPU clock speed to real slow values (ca. < 1MHz), the communication between the DIY Calculator hardware and the Loader application is not guaranteed to work reliable!
  • open a terminal to the DIY Calculator hardware

The application is available both in Windows and Linux. It requires the GTK Widgets runtime library, version 2.6.4 or newer. Linux users will most likely have already installed GTK, Windows users may download the latest runtime from here: [1].

View more screen shots:

Linux:

all windows open
Enlarge
all windows open
terminal session
Enlarge
terminal session


Windows:

all windows open
Enlarge
all windows open
terminal session
Enlarge
terminal session


Plus for those who can't wait: We created a simulator program that simulates the real hardware responses. Just connect the two communication ports of your PC via a null modem or connect two PCs via null modem, start the simulator program and try out the DIY Calculator Loader application. Be aware that this is 'not' a CPU simulator (you already have this with the Virtual DIY Calculator); it just simulates the ROM monitor responses. diy_sim-1.0-src.zip

For other updates visit the other sections: Hardware Project ROM Monitor Project

Project status (7.Nov.2006):

A lot has happened since the last update. The loader application has made great progress.

Project status (12.Oct.2006):

work started

Project status (19.Jul.2006):

considered

Personal tools